N I P P L E M EN I N T ' L
The NIPPLE ACADEMY
Chapter 4. 3 Nipple Size Retention -
OO Rubber Baby Bottle Nipples OO
Yet another method for keeping your NIPPLES extended, taught to me several years ago by a California buddy, is to use (LISTEN AND BELIEVE!) the rubber, baby bottle NIPPLES used on the tops of baby bottles. You will need to find Evenflow or Gerber brands..and they MUST SAY....."Standard Nipples".. Don't attempt this with other models, unless you want to experiment after you have this "mastered"!! They must say "Standard Nipples".. and they come conveniently enough in two to the package...(Was someone out there thinking ahead??)...
As you will see. (and hopefully like to watch). this is an ADVANCED PROCEDURE>>!! If your nipples aren't quite as large as the inside of the rubber nipples, delay a few weeks (smile) ......until they are...!!
Here's what you do....Remove the rubber bottle nipples from the package and note that the NIPPLE on each stands up from a wide, slightly convex area, with another firmer edge running around the base. Taking a sharp knife or scissors, carefully cut the protruding nipples off - to within a half-inch of the point where they become part of the base. Make the cut as level as possible.
This is what they will look like at this point.......
Be sure your NIPPLES are pumped-up and free of lubricant or saliva. What you're going to do is put your NIPPLE through the hole in the rubber nipple from the backside, and pull the rubber nipple opening down to the base of your nipple... YES YOU CAN!! (You men with hairy pecs will need to do a little forestry work before trying this!!)
Holding the cup in both hands with the underside of the nipple facing your chest, stretch the cut-off nipple opening - open.. by pulling outwardly with your fingers and thumbs, turning the whole rubber nipple almost flat...and pulling the rest of the cup outwardly as well...
Once you have the hole open, place the open hole over your NIPPLE - seating it as far down on your nipple as you can..- so most of your NIPPLE is sticking out of the front of the rubber nipple. At the same time.. pull the flat portion next to the nipple opening down against you pec.....
Like
this..........
The "squeeze" of the rubber nipple hole around your NIPPLE will pull the rubber nipple out and away from your pec and allow the base of the cup to assume its normal convex shape- holding your NIPPLE erect. YEAH..IT'S LIKE HAVING A "COME SUCK IT" SIGN ON EACH NIPPLE!!
And this is what it will look like on......
And........a closer shot..........
So....have a good time with the Baby Bottle NIPPLE CUPS....
Take good care...!!!!!!
Ahead to: NIPPLE SIZE RETENTION - Medical syringes/rubber strips