NIPPLEMEN INT'L
The NIPPLE ACADEMY
Chapter 2.5
Nipple Enlargement -
Nipple Pump Cylinders
I imagine most of you NIPPLEMEN out there have heard, or perhaps even tried, a cock pump cylinder. They consist of clear plastic tubes with a one-way valve on one end. You insert your cock into the cylinder until the base of the cylinder rests against your pelvic area.. (usually shaved for the best seal).. Then... you attach a hand or electric pump which SUCKS the air out of the cylinder.. and expands the contents!!! I can tell you know what I mean!!! Theoretically... you could use a giant, yellow snake-bite cup and use it on your cock the same way we use it on a nipple.. !! (Never thought of it that way before!!) As you can see.. what we're doing is creating a sealed environment where we can push/pull the air out of a space around our nipple.. thereby creating a vacuum, which in turn sucks fluid into our nipple.. making it HUGE!! (How's that for not having take any physics course along the way!! Let me hear from you physics majors out there!! I'm sure I've missed something!!)
They also sell pairs of small diameter cylinders for nipples!! Here's what the nipple cylinders look like:
And this is what the hand-held pump looks like:
And.. here's how the system works....
Take one of the nipple cylinders and make sure the end with the valve is screwed down securely to the cylinder. You will notice that the valve has threads on it.. and indeed you can unscrew it completely from the cylinder. (By the way.. this is also the way to release pressure once you have the cylinder on.. when it feels like your nipples is about to be sucked-off!!! .. so to speak!!). You will also notice there is a release button on one side of the valve enabling you to disconnect the pump from the cylinder after you've sucked all the air out of the cylinder.. and your nipples are being sucked into it!!
OK.. we're ready to roll..!!
Take the end of the plastic hose (the other end from the one attached to the pump) and push it into the hole in the valve on the end of the nipple cylinder.. like this: (there will be a little resistance.. as it has to be a tight fit to maintain the suction...but you will feel it click into place.)
Next... since we know there must be a complete seal between the flanged bottom of the nipple cylinder and your pec... make sure there is a clear, hair-free area where the base of cylinder is going to suck against your pec.. just as with the rubber suction cups!! (Would you like a picture of that??
And.. in order to make a better seal between the cylinder and your pec, you need to place some type of liquid on your pec and on the bottom of the cylinder.. and even some up inside the cylinder... I use good 'ole Daddy spit... Others use petroleum jellies.. and other sticky unguents!!
Now that we have your pec/nipple/cylinder coated with your favorite-flavored lubricant (just kidding - perhaps!!)..pick up the pump and the attached plastic tube with the nipple cylinder.. all in one hand... Yes.. you can do it... Place the base of the cylinder against your pec.. and while pressing it firmly against your pec, grab the pump handle with the other hand and gently start to pull up/out on the pump handle. WOW... YIII**PPPEEE.. you should start to see your nipple being sucked into the nipple tube...!!! like this..........>>
Once you feel the suction is secure... push the clip on the side of the valve of the cylinder.. and you'll hear a click.. The hose will be released.. and the cylinder will be free.. sucking your nipple as you watch!! Like this>>>>>>>>
As with the rubber cups, take them off after a few minutes to see how they're coming along... Yes.. you can have blisters come-up very easily with this harder suction.. so. TAKE IT EASY AT FIRST!! IT MAY TAKE A FEW TIMES UNTIL YOU CAN GET THE CYLINDER TO STAY ON!!! BE CAREFUL IT DOES NOT DROP TO THE FLOOR.. AS IT MAY SHATTER!!
When you want to remove the cylinders you can either:
1) Gently pull the cylinder until the suction is released .. or
2) Turn the entire valve on the end of the cylinder in a counter-clock direction.. to allow the suction to be broken..
AND.. that's it!! Except.. a couple personal points I'd like to make....
One... the cylinders and the pump are moderately expensive... One company which sells the pumps and cylinders is Vacu-Tech... online at: http://www.vacutech.com/home.htm#welcome.
You will see that the basic hand pump alone runs $39... and a pair of the cylinders run $49... So.. you will want to think about it... You will also see that there is a hands-free pump for $59.. and a double connector plastic tube set-up for $28.. so you can pump both nipples at the same time... Also. you'll see the SUPER ELECTRIC PUMP which runs $299. Take a look...
and here are a couple other pointers...
On the plus side - I like the cylinders as you can see your nipples as they are being pumped. Also, you can, to a degree, increase/decrease the suction on your nipples by pulling more on the pump.
On the ??-side... I don't seem to get my nipples as hard with this system as I do with the yellow cups... Let me hear what some of you guys feel on this matter... Also, there is the expense involved.. They are great to have in your "repertoire".. but not essential!! And.. the cylinders are quite fragile... I recommend you keep a covering around at least the flanged ends.. as they can break-off if dropped.. (which is easily done with greased hands!!) OOOOOOPPPS
For those of you who like to tie your nipples off while they're still in the rubber snake bite suction cups, with these it's practically impossible to get the thong/cord in behind the cylinder without it falling off... (and breaking!!). What I recommend it.. once you have reached the "pinnacle of pump" in the cylinders, take the cylinders off, dry your nipples off, and put on the yellow cups for a few minutes... Then tie-off from the yellow cups... It might save you a few cuss words... or worse!!
ENJOY...... USE YOUR GOOD SENSE...
H O M E Ahead to: Injuries: Prevention/Treatment